1. |
2023/03/23 |
論文 |
Full-mouth rehabilitation of a patient with Sjogren’s syndrome with maxillary titanium-zirconia and mandibular monolithic zirconia implant prostheses fabricated with CAD/CAM technology: A clinical report Journal of Functional Biomaterials 14(4),pp.174 (共著) |
2. |
2023/03/18 |
論文 |
Minimally invasive laminate veneer therapy for maxillary central incisors Medicina 59(3),pp.603 (共著) |
3. |
2022/11/01 |
論文 |
Effectiveness of different polishing kits for chairside CAD/CAM provisional restorative materials Operative Dentistry 47(6),pp.660-667 (共著) |
4. |
2022/11 |
論文 |
Fatigue bond strength of dental adhesive systems: Historical background of test methodology, clinical considerations and future perspectives Japanese Dental Science Review 58,pp.193-207 (共著) |
5. |
2022/10/02 |
論文 |
CAD/CAM lithium disilicate ceramic crowns: Effect of occlusal thickness on fracture resistance and fractographic analysis Dental Materials Journal 41(5),pp.705-709 (共著) |
6. |
2022/10/02 |
論文 |
Short fiber-reinforced resin-based composites (SFRCs); Current status and future perspectives Dental Materials Journal 41(5),pp.647-654 (共著) |
7. |
2022/09/28 |
論文 |
Diagnostic mock-up as a surgical reduction guide for crown lengthening: Technique description and case report Medicina 58(10),pp.1360 (共著) |
8. |
2022/08/29 |
論文 |
Bond durability of two-step HEMA-free universal adhesive Journal of Functional Biomaterials 13(3),pp.134 (共著) |
9. |
2022/08/25 |
論文 |
Comparison of fracture resistance for chairside CAD/CAM lithium disilicate crowns and overlays with different designs Journal of Prosthodontics (共著) |
10. |
2022/06 |
論文 |
Effect of mold enclosure and chisel design on fatigue bond strength of dental adhesive systems European Journal of Oral Sciences 130(3),pp.e12864 (共著) |
11. |
2022/04/30 |
論文 |
Soft tissue management on pontic and implant sites before implants insertion Cureus 14(4),pp.e24621 (共著) |
12. |
2022/04/01 |
論文 |
Comparison of full and partial coverage crowns with CAD/CAM leucite reinforced ceramic blocks on fracture resistance and fractographic analysis Dental Materials Journal 41(2),pp.295-301 (共著) |
13. |
2022/04 |
論文 |
Immediate bond performance of resin composite luting systems to saliva-contaminated enamel and dentin in different curing modes European Journal of Oral Sciences 130(2),pp.e12854 (共著) |
14. |
2022/04 |
論文 |
Students’ perception of digital waxing software for dental anatomy education Journal of Oral Science 64(2),pp.178-180 (共著) |
15. |
2022/03/06 |
論文 |
Novel translucent monolithic zirconia fixed restorations in the esthetic zone Clinical Case Reports 10(3),pp.e04599 (共著) |
16. |
2022/02/14 |
論文 |
Color stability of fully-and pre-crystalized chair-side CAD-CAM lithium disilicate restorations after required and additional sintering processes Journal of Advanced Prosthodontics 14(1),pp.56 (共著) |
17. |
2022/02/04 |
論文 |
A multidisciplinary approach to congenitally missing central incisors: A case report 14(2) (共著) |
18. |
2022/01/10 |
論文 |
CAD/CAM complete dentures for atrophic alveolar ridges: Workflow combining conventional and novel techniques Cureus 14(1),pp.e20193 (共著) |
19. |
2022/01/10 |
論文 |
Computer-aided design and computer-aided manufacturing (cad/cam) complete dentures for atrophic alveolar ridges: Workflow combining conventional and novel techniques Cureus 14(1),pp.e21093 (共著) |
20. |
2021/12/27 |
論文 |
Rubber dam isolation for bonding ceramic veneers: A five-year post-insertion clinical report Cureus 13(12),e20748頁 (共著) |
21. |
2021/12/01 |
論文 |
Light transmission for a novel chairside CAD/CAM lithium disilicate ceramic Journal of Contemporary Dental Practice 22(12),pp.1365-1369 (共著) |
22. |
2021/11 |
論文 |
A customized metal guide for controllable modification of anterior teeth contour prior to minimally invasive preparation Saudi Dental Journal 33(7),pp.518-523 (共著) |
23. |
2021/10 |
論文 |
Bonding and wear properties of self-adhesive flowable restorative materials European journal of oral sciences 129(5),pp.e12799 (共著) |
24. |
2021/10 |
論文 |
Effect of ion-releasing filler-containing gel application on dentin remineralization using optical coherent tomography American Journal of Dentistry 34(5),pp.286-292 (共著) |
25. |
2021/10 |
論文 |
Esthetic outcome for implant therapy of a maxillary lateral incisor using prefabricated titanium and customized zirconia abutments: 4-year clinical reports Clinical Case Reports 9(10),pp.e04983 (共著) |
26. |
2021/10 |
論文 |
Influence of different application methods on the bonding effectiveness of universal adhesives to dentin in the early phase Journal of Adhesive Dentistry 23(5),pp.447-459 (共著) |
27. |
2021/10 |
論文 |
Successful development and implementation of a digital dentistry curriculum at a US dental school Journal of Oral Science 63(4),pp.358-360 (共著) |
28. |
2021/10 |
論文 |
Ultrasonic measurement of dentin remineralization effects of dentifrices and silver diamine fluoride Acta Odontologica Scandinavica 79(7),pp.528-535 (共著) |
29. |
2021/09 |
論文 |
Handling and mechanical properties of low-viscosity bulk-fill resin composites Operative Dentistry 46(5),pp.e185-e198 (共著) |
30. |
2021/09 |
論文 |
Handling properties and surface characteristics of universal resin composites Dental Materials 37(9),pp.1390-1401 (共著) |
31. |
2021/09 |
論文 |
Minimally invasive multidisciplinary restorative approach to the esthetic zone including a single discolored tooth Operative Dentistry 46(5),pp.477-483 (共著) |
32. |
2021/08/20 |
論文 |
Effect of adhesive application method on the enamel bond durability of a two-step adhesive system utilizing a universal adhesive-derived primer Applied Sciences 11(16),pp.7675 (共著) |
33. |
2021/08 |
論文 |
Influence of light irradiation for in-office tooth whitening: A randomized clinical study American Journal of Dentistry 34(4),pp.201-204 (共著) |
34. |
2021/08 |
論文 |
Intraoral scanning with rubber dam isolation in place for fabrication of a chairside computer-assisted design and computer-assisted manufacture ceramic restoration Journal of Contemporary Dental Practice 22(8),pp.943-946 (共著) |
35. |
2021/08 |
論文 |
Relationships between flexural and bonding properties, marginal adaptation, and polymerization shrinkage in flowable composite restorations for dental application Polymers 13(16),pp.2613 (共著) |
36. |
2021/07 |
論文 |
Flexural properties and wear behavior of computer-aided design/computer-aided manufacturing resin blocks Dental Materials Journal 40(4),979-985頁 (共著) |
37. |
2021/05/07 |
論文 |
Emotional, behavioral, and social effects of anterior tooth loss: a cross-sectional study Brazilian Dental Science 24(2) (共著) |
38. |
2021/05/01 |
論文 |
Flexural properties and polished surface characteristics of a structural colored resin composite Operative Dentistry 46(3),pp.e117-e131 (共著) |
39. |
2021/04 |
論文 |
Bond durability of universal adhesives to intact enamel surface in different etching modes European journal of oral sciences 129(2),pp.e12768 (共著) |
40. |
2021/03/01 |
論文 |
Comparison of different etch-and-rinse adhesive systems based on shear fatigue dentin bond strength and morphological features the interface Dental Materials 37(3),pp.e109-e117 (共著) |
41. |
2021/03/01 |
論文 |
Evaluation of polishing systems for CAD/CAM polymer-infiltrated ceramic-network restorations Operative Dentistry 46(2),pp.219-225 (共著) |
42. |
2021/03 |
論文 |
Effect of double-layer application on the early enamel bond strength of universal adhesives Clinical Oral Investigations 25(3),pp.907-921 (共著) |
43. |
2021/03 |
論文 |
Evaluation of structural coloration of experimental flowable resin composites Journal of Esthetic and Restorative Dentistry 33(2),284-293頁 (共著) |
44. |
2021/03 |
論文 |
Influence of one-step professional mechanical tooth cleaning pastes on surface roughness and morphological features of tooth substrates and restoratives Journal of Oral Science 63(2),pp.133-138 (共著) |
45. |
2021/01/01 |
論文 |
Clinical decision-making regarding endodontic therapy vs extraction and implant-assisted replacement: a systematic review and meta-analysis General Dentistry 69(1),pp.52-57 (共著) |
46. |
2020/12 |
論文 |
Factors affecting clinical decision-making and treatment planning strategies for tooth retention or extraction An exploratory review Nigerian Journal of Clinical Practice 23(12),pp.1629-1638 (共著) |
47. |
2020/12 |
論文 |
Ultrasonic measurement of remaining dentin thickness using a pencil-type transducer American Journal of Dentistry 33(6),pp.320-324 (共著) |
48. |
2020/11/01 |
論文 |
Effect of layering techniques on polymerization shrinkage stress of high- and low-viscosity bulk-fill resins Operative Dentistry 45(6),pp.655-663 (共著) |
49. |
2020/11 |
論文 |
Conservative ultrathin veneer restorations with minimal reduction: a 5-year follow-up report Journal of Contemporary Dental Practice 21(11),pp.1293-1297 (共著) |
50. |
2020/09 |
論文 |
Minimally invasive technique for non-vital tooth bleaching using traditional Japanese paper 62(4),pp.458-460 (共著) |
51. |
2020/09 |
論文 |
Simulated cuspal deflection and flexural properties of bulk-fill and conventional flowable resin composites Operative Dentistry 45(5),pp.537-546 (共著) |
52. |
2020/08 |
論文 |
Comparison of dentin bond durability of a universal adhesive and two etch-and-rinse adhesive systems Clinical Oral Investigations 24,pp.2889-2897 (共著) |
53. |
2020/08 |
論文 |
Conservative approach for management of fractured maxillary central incisors in young adults Clinical Case Reports 8(12),2692-2700頁 (共著) |
54. |
2020/08 |
論文 |
Influence of 38% silver diamine fluoride application on bond stability to enamel and dentin using universal adhesives in self‐etch mode European Journal of Oral Sciences 128(4),pp.354-360 (共著) |
55. |
2020/08 |
論文 |
Role of the functional monomer 10-methacryloyloxydecyl dihydrogen phosphate in dentin bond durability of universal adhesives in etch-&-rinse mode Dental Materials Journal 39(4),pp.616-623 (共著) |
56. |
2020/04 |
論文 |
Comparison of occlusal wear between bulk-fill and conventional flowable resin composites American Journal of Dentistry 33(2),pp.74-78 (共著) |
57. |
2020/03/01 |
論文 |
Digitally fabricated immediate complete dentures: case reports of milled and printed dentures International Journal of Prosthodontics 33(2),pp.232-241 (共著) |
58. |
2020/02/06 |
論文 |
Chair-side CAD/CAM fabrication of a single-retainer resin bonded fixed dental prosthesis: a case report Restorative Dentistry and Endodontics (共著) |
59. |
2020/01 |
論文 |
Influence of a primer resembling universal adhesive on the bonding effectiveness of an experimental two-step self-etch adhesive Journal of Adhesive Dentistry 22(6),pp.635-646 (共著) |
60. |
2018/05 |
論文 |
Wear of resin composites: Current insights into underlying mechanisms, evaluation methods and influential factors 54(2),pp.76-87 (共著) |
5件表示
|
全件表示(60件)
|